AIRLink 5G Core
New product
The Most Advanced AI Drone Flight Controller. AIRLink stands for Artificial Intelligence & Remote Link. The unit includes cutting-edge drone autopilot, AI mission computer and LTE connectivity unit.
Recommended for experienced organizations intented to proceed with deep integration into their products.
Refer online documentation for full specs and setup procedures.
WATCH PRODUCT LAUNCH VIDEO
The most advanced drone avionics platform and enabler of Sky-Drones Technology for enterprise drones includes:
- Cutting-edge Drone Autopilot
- Artificial Intelligence Mission Computer
- 4G or 5G Connectivity Unit
5G Inside
AIRLink has an integrated 5G connectivity module which provides lower latency and higher data bandwidth compared to 4G option.
- Up to 600 Mbps bandwidth
- 5G sub-6 and mmWave, SA and NSA operations
- 4G Cat 20, up to 7xCA, 256-QAM DL/UL, 2xCA UL
- 4 x 4 MIMO for 4G and 5G (sub-6 bands)
- 3G HSPA+
- Approved by JRL/JTBL, FCC, PTCRB, RED, GCF
11 YEARS OF EXPERIENCE
We have the right experience to enable the next generation in drone technology.
- The most advanced and versatile drone avionics available today
- Fully compatible with the latest drone industry standards
- Designed and manufactured in the United Kingdom
PX4 - Open Source Autopilot for Drones
AIRLink, the most advanced AI avionics for drones fully supports PX4 Software stack. You can view, edit and compile the open source code from the official repository.
ArduPilot - Open Source Autopilot for Drones
Sky-Drones is an official member of Ardupilot Partner Program and AIRLink fully supports Ardupilot Software stack.
NDAA COMPLIANT
AIRLink is fully compliant with the 2020 National Defense Authorization Act, Sec 848
EXPLORE THE MAIN FEATURES
FPV VIDEO IN HD AS STANDARD
AIRLink is equipped with 1080p HDR camera providing an exceptional image quality. FPV camera connector is exposed on the front side making the integration and camera mounting quick and simple in even the most space-constricting UAV designs. Native CSI interface provides the minimum latency physically possible (typically less than one frame, equally 17 ms).
- 1080p HDR
- CSI interface
- FPV camera included
- Front side camera connector
- Separate HDMI for payload camera
THE NAME SPEAKS FOR ITSELF
AIRLink - Artificial Intelligence & Remote Link with all interfaces exposed to all sides:
- Power input with voltage & current monitoring
- AI Mission Computer micro SD card
- Flight Controller micro SD card
- AI Mission Computer USB Type-C
- PPM Input, SBUS Output, RSSI monitor
CONNECTIVITY AND VIDEO
AIRLink is continually connected to the internet, but in more ways than one...
- Ethernet Port with power output
- Telemetry port
- Second GPS port
- Spare I2C / UART port
- Flight Controller USB Type-C
- Micro SIM Card
- HDMI Input port (Payload camera)
CONNECT ANYTHING
Direct HDR FPV camera connector (included). Redundant CAN bus for critical peripherals.
- Main GNSS and compass port
- Main telemetry port
- CSI camera input
- CAN 1
- CAN 2
BUILT IN 4G/5G AND WIFI
Internet connectivity straight from the very first power up.
- SBUS input
- 16 PWM output channels
- 2x or 4x LTE antenna sockets (MIMO)
- WiFi Antenna socket (AP & Station modes)
WATCH FULL LAUNCH WEBINAR LIVE
On April 14th, 2021 Kirill Shilov, Founder & CEO Sky-Drones held a live launch webinar where he presented the three-in-one revolutionary product to the drone industry.
Watch the full webinar recording on YouTube if you missed the live event.
RADIO SETTINGS
SmartAP GCS provides all status information on radio link including RSSI, SNR, packets and allows to dynamically change all major settings. For instance, operating frequency, bandwidth or power can be change just with a one click. Remote module configuration is done automatically via ground module.
AES-256 as standard
Connection is AES-256 encrypted and network key can be easily changed anytime when it's needed.
MEET AIRLINK EDITIONS
In AIRLink, Sky-Drones have developed not only a 3-in-1 product, but 3 products in 1. This means that we can offer the module to a large variety of consumers and in a number of different ways to suit the needs of everyone.
1. AIRLINK CORE
Sky-Drones will provide the internal workings of the units without the external aluminium casing so as to integrate this directly into the manufacturing of your fleet. We will guide you through making sure the technical requirements are met on your UAV to comply with the needs of the AIRLink units.
- For drone manufacturers
- Medium to high volume production
- Deep integration
- Non-ITAR
- Manufactured in the UK
- Shipped within 2 days
- Engineering support from Sky-Drones
2. AIRLINK ENTERPRISE
The units come as we designed and manufactured them, and are ready to attach to your UAV immediately.Sky-Drones can provide a discounted rate per unit when buying for multiple drones in your UAV fleet.
- For drone manufacturers
- Low to medium volume production
- Evaluation, easy installation
- Non-ITAR
- Manufactured in the UK
- Shipped within 1-2 days
- Engineering support from Sky-Drones
3. REFERENCE DESIGN
Sky-Drones are ready to offer licensing for larger UAV manufacturers to build the units in-house, saving time and costs all round.
- For drone manufacturers
- High volume production
- For super tight integrations
- Schematics / Layout / CAD
- Modify schematics and layout to your needs
- Manufacture at your own factory
- You control the volume
- Engineering support from Sky-Drones
WHAT'S INCLUDED?
SmartAP AIRLink set includes everything needed to setup the system and get prepared for the flight. Standard set contains:
- 1x AIRLink Enterprise unit
- 1x FPV camera with CSI cable
- 1x WiFi antenna with MMCX connector
- 2x LTE antenna with MMCX connector
- 1x HDMI to mini HDMI cable
- 1x set of cables (7 cables for all connectors)
- 1x JST-GH to Ethernet RJ45 dongle
BUY NOW
DETAILED SPECIFICATIONS
Just in case you want to know absolutely everything about AIRLink
General | |
Naviagtion | Accelerometers, Gyroscopes, Magnotometer, GNSS, Rangefinders, Lidars, Optical Flow, Visual |
IMU | 3x-Redundant Vibration Dampened Temperature Stabilized |
GNSS | GPS, GLONASS, Galileo, BeiDou, RTK (option) |
Flight Modes | Manual, Stabilize, GNSS-Assisted, Autonomous Waypoints, Guided, Terrain Following |
Flight Logs | SD Card up to 256GB |
Temperature | Operating from -40°C up to +50°C |
ECCN | 7E994 |
Supported Vehicle Types | |
Multirotor | Quad, Hex, Octo Dodeca, Coaxial, Y |
Fixed Wing | Ailerons, Flaps, Elevons V-Tail, H-Tail |
VTOL | Tailsitter Multicopter Planes Tiltrotor |
Weight and Dimensions | |
Module Weight | 198g |
Module Dimensions | L103 x W61 x H37mm |
Flight Controller | |
Processor | STM32F765 |
Frequency | 216 MHz |
Flash | 2MB |
RAM | 512 kB |
IMU | 3 Accelerometers, 3 Gyroscopes, 3 Magnetometers, 2 Barometers |
Ethernet | 10/100 Mbps LAN with AI Missioni Computer |
UARTs | Telemetry 1, Telemetry 2 (AI Mission Computer), Telemetry 3, GPS 1, GPS 2, Extra UART, Serial Debug Console |
CAN | CAN 1, CAN 2 |
USB | MAVLink Serial Console |
RC Input | SBUS, RSSI, PPM, Spektrum |
PWM Out | 16 Channels |
Connectivity Module | |
Type | 5G sub-6 FDD, TDD, mmWave 4G UMTS/HSPA(+) |
SIM Cards | Integrated eSIM External MicroSIM card slot |
Antenna | 4x4 MIMO or 2x2 MIMO |
Data Transfer | |
Downlink | 5G: 600 Mbps 4G: 150 Mbps |
Uplink | 5G: 270 Mbps 4G: 50 Mbps |
AI Mission Computer | |
CPU | 6-Core: Dual-Core Cortex-A72 Quad-Core Cortex-A53 |
GPU | Mali-T864, OpenGL ES1.1/2.0/3.0/3.1 |
VPU | 4K VP8/9 4K 10bits H265/H264 60fps Decoding |
Power | Software Reset Power Down RTC Wake-Up Sleep Mode |
RAM | Dual-Channel 4GB LPDDR4 |
Storage | 16GB eMMC 5.1 Flash MicroSD up to 256GB |
Ethernet | 10/100/1000 Native Gigabit |
Wireless (WiFi/BT) | 802.11a/b/g/n/ac Bluetooth 2x2 MIMO |
USB | USB 3.0 Type C |
Video | 4-Lane MIPI CSI (FPV Camera) 4-Lane MIPI CSI with HMDI Input (Payload Camera) |
Video | |
Camera Interfaces | FPV MIPI-CSI Camera Input (included) Payload HDMI Camera Input Ethernet IP Based Cameras USB Cameras |
HDMI Input | Native Support with Integrated FPGA Converter |
Video Codec | 1080p 60fps H.264/265 VP8/VP9 |
FREQUENTLY ASKED QUESTIONS
A selection of FAQs asked by our customers. Still unable to find the information you're looking for? Get in touch today!
Right now! Feel free to place an order using this web page. We accept Paypal and bank wire transfer. Let us know if you need any special paperwork for your order. Order processing and shipping time is 1-2 days. We ship worldwide.
These are all available on our website on the AIRLink product page. We also have our online documentation which has a more in-depth collection of data on AIRLink. There is also a PDF Datasheet available for download.
Via our online documentation , also accessible at http://docs.sky-drones.com - this is our documentation portal and it holds all the detailed information for each and every Sky-Drones hardware and software product
AIRLink has 2 camera ports: 1 x CSI and 1 x HDMI. We include a CSI camera in every AIRLink set, alongside a mini-HDMI to micro-HDMI cable for connecting your payload camera immediately. USB cameras or IP-based cameras are also attachable, just get in touch and we can talk you through it!
AIRLink uses widely adopted drone industry standards, and if you’d like to modify the software, this is doable. The hardware is not open source but for our large volume manufacturers we can provide you with a reference design and help you set up your own production. This will allow you to control your own volume and quantity
Yes! We can give you full access to the mission computer and autopilot so you can deploy your own applications through AIRLink. This is something we can work with you on, so use our contact form to get in touch
Yes! AIRLink quite literally stands for Artificial Intelligence and Remote Link. This means that you can have the computing power to run complex algorithms onboard
AIRLink has both integrated WiFi and LTE connectivity. WiFi can be used as the access point to connect AIRLink to your router, and LTE connectivity means that AIRLink comes to you with the internet already enabled. You need only set up or log into your Sky-Drones Cloud account and enable the data plan. Alternatively, use your own carrier and data plan to manage this yourself if you’d prefer. Finally, AIRLink has an ethernet port for IP datalinks integration. Stay tuned to find out more!
AIRLink is manufactured in the hundreds per month very easily. If required, we can manufacture thousands per month with prior requirement notifications. AIRLink is manufactured in the United Kingdom using genuine and quality-assured materials. All units are tested before being shipped to customers