Cables There are 17 products.
AIRLink Power Cable
Power cable suitable for AIRLink Flight Control System. The cable has 10-pin JST-GH connector on one side and 0.1" connector on the other side. It is fully compatible with AIRLink, SmartAP Power Distribution Board and of the other power distribution boards available from the other vendors.
$5In StockAIRLink GPS Cable
GNSS cable suitable for AIRLink Flight Control System. The cable has 10-pin JST-GH connector on one side and Molex Picoblade connector on the other side. It is fully compatible with AIRLink, SmartAP GNSS and most GNSS receivers available from the other vendors.
$5In StockAIRLink Ethernet Cable
Ethernet cable suitable for AIRLink Flight Control System. The cable has 8-pin JST-GH connector on both sides. It is fully compatible with AIRLink, AIRLink Telemetry and most Ethernet based peripherals like telemetry modules, IP-based cameras and more.
$5In StockAIRLink Serial Cable
Serial cable suitable for AIRLink Flight Control System. The cable has 6-pin JST-GH connector on both sides. It is fully compatible with AIRLink and most serial based peripherals like telemetry modules, GNSS receivers, ADSB, lidars and more.
$5In StockAIRLink RSSI Cable
RSSI / PPM receiver cable suitable for AIRLink Flight Control System. The cable has 6-pin JST-GH connector on one side and 0.1" connectors on the other side. It is fully compatible with AIRLink and most popular RC receivers.
$5In StockAIRLink CAN Cable
CAN bus cable suitable for AIRLink Flight Control System. The cable has 4-pin JST-GH connector on both sides and is fully compatible with AIRLink and most popular CAN-based peripheral devices.
$5In StockAIRLink SBUS Cable
SBUS cable suitable for AIRLink Flight Control System. The cable has 3-pin 0.1" connector on both sides and is fully compatible with AIRLink and most popular RC receivers.
$5In StockGNSS Cable for SmartAP PRO
GNSS cable for SmartAP PRO Flight Control Systems. The cable has 6-pin 2.54 mm connector compatible with SmartAP Autopilot and 6-pin Molex PicoBlade connector compatible with SmartAP GNSS Modules.
$5In StockGNSS / Power cable for SmartAP MAX
GNSS / Power cable suitable for SmartAP MAX Flight Control Systems. The cable has 6-pin Molex Picoblade connector on both sides and is fully compatible with other SmartAP products.
$4In StockPower cable for SmartAP PRO
Power cable for SmartAP PRO Flight Control Systems. The cable has 2 wires and 2.5 mm pitch connector compatible with SmartAP PRO Autopilot.
$5In Stock
