SmartLink Set

New product

Broadband Digital Datalink with Integrated Onboard Computer. Two HD video channels, telemetry and control with ultra low latency and range up to 20 km.

More details

Instead of $4,048

PayPal or Bank wire transfer

PayPal or Bank wire transfer

THREE DATALINKS IN ONE

There is no need to use multiple separate telemetry systems anymore. SmartLink features AES-256 secured 2x HD video channels, telemetry and manual control ultra low-latency transmission with the range up to 20km. LTE with unlimited range is available as an option.

VIDEO

CSI camera and mini HDMI input ports support up to 1080p@60 fps video input with ultra low latency.

TELEMETRY

Telemetry allows system configuration, mission planning, status monitoring and much more.

CONTROL

Simply connect USB joystick in SmartAP GCS and get full manual control with less than 20 ms latency.

AIR Module

SmartLink Air is based on powerful quad-core ARM Cortex A53 SoC (system-on-chip) computer running Linux.

The system is capable of handling two real time HD video streams from cameras (CSI and HDMI), autopilot telemetry and control. It also has plenty of resources for user applications. Various interfaces e.g. USB, UART, I2C, SPI allow to connect payload and tightly integrate it with flight controller and / or ground control station. LTE connection is available as an option and is plug&play.

GROUND Module

Ground module is very compact and lightweight, it has micro USB connector to interact with any kind of device - laptops, smartphones, tablets, desktop computers supported. All you need to do is connect it and open SmartAP GCS App.

Ground module features active cooling system which allows the module to withstand high ambient temperatures making it reliable even in harsh environments.

2x2 MIMO technology provides higher bandwidth, lower latency and longer range.

SOFTWARE

SmartLink was specifically designed to be used with SmartAP GCS - powerful cross-platform ground control station. SmartAP GCS supports:

  • 2x HD video streams display
  • Full camera controls
  • Video recording on microSD card
  • Image capture on microSD card
  • Radio settings configuration
  • Drone control joystick
  • Payload control joystick

SmartAP GCS can be used on any platform and operating system including MacOS, Windows, iOS, Android and Linux.

RADIO SETTINGS

SmartAP GCS provides all status information on radio link including RSSI, SNR, packets and allows to dynamically change all major settings. For instance, operating frequency, bandwidth or power can be change just with a one click. Remote module configuration is done automatically via ground module.

AES-256 as standard

Connection is AES-256 encrypted and network key can be easily changed anytime when it's needed.

Quad Core ARM Cortex-A53

Powerful system on chip computer running Linux handles video, communication, control and also leaves resources for custom user applications.

Processor
ProcessorARM Cortex-A53
Cores number4
Frequency1.2 GHz
RAM1GB
EMMC4GB
Radio
Technology2x2 MIMO
Frequency2402 - 2482 MHz
Powerup to 30 dBm / 1W
Bandwidth4 / 8 MHz
EncryptionAES-256
Data rate25 Mbps
Latency< 100 ms
Range20 km
Environment
VisibilityLine of Sight
Ambient temperature-40...+50°C
Connectivity (Air)
CSI Camerax1
Mini HDMI Camerax1
Micro SDx1
Micro USBx1
USB Ax2
UARTx2
SPIx2
I2Cx2
Power Inputx1
SMA Antennax2
LTE Modulex1
Connectivity (Ground)
Micro USBx1
Power Inputx1
SMA Antennax2
Antennas
Air Modulex2 SMA Flat Panel 5dBi
Ground Modulex2 RP-SMA 8dBi
Features
HD Video1080p@60 fps
1080p@30 fps
720p@60 fps
720p@30 fps
TelemetryTX / RX via UART TTL
ControlFull manual control
SoftwareWindows, iOS, MacOS, Android
Size and Weight
Size (Air Module)86x50x29 mm
Size (Ground Module)72x46x23 mm
Weight (Air Module)139 g
Weight (Ground Module)83 g
Power
Air Module5V DC
1x720p & 50% RF - 4W
2x1080p + 100% RF - 8W
Ground Module7-40V DC
3W

CONNECTIVITY IS THE KEY

all popular interfaces to ensure tight payload integration when it's needed

Pack content